the Stud Sensor 100 to a different location and try again. Releasing the activation button will turn off the sensor. 6 Slide the Stud Sensor 100 slowly across the surface in a straight line. 9 As it detects a stud, the red LED's will go on. 6 When it detects the stud edge, the top LED will go on and an audible tone will sound. Use the. Stanley Stud Sensor 200 The Stud Sensor 200 uses electronic signals to locate the center of studs, joists or live AC wires through drywall or other common building materials. Once the center of a stud has been detected in one pass across the surface, the Stud Sensor 200 gives a visual display and sounds an audible tone.
Page 5 Stud Sensor STHT77587/ WARNING: STHT77588 turns on an LED and sounds an audible tone. This tool is not a measuring device and should A marking hole allows you to easily note the stud center not be used as a substitute for a voltmeter. Page 6 • STHT77587 will work on up to 3/4" (19mm) thick drywall. label and package. • STHT77588.. Page 1 • Self-Calibration Complete STHT77407 REV A 08 Stanley Stud Sensor 300 OPERATING INSTRUCTIONS Slide the Stud Sensor 300 slowly across the surface in a straight line. The Stud Sensor 300 uses electronic signals to locate the center of studs, joists. Page 2 WARRANTY Surface Differences METAL button. The "AC TRACKING" icon will be Stanley Tools warrants the Stud Sensor 300 against.