Super quick vid on how to properly test an ADI stator using and Ohm meter. Blue and Red wires should read 4.5-6.2. Blue/White and Red/White should read 5.4-6.. Mercury & Mariner Outboards . Trigger and stator - difference and how to test. Thread starter twr7cx; Start date Sep 25, 2009; Status Not open for further replies.. Trigger and stator - difference and how to test this is really helpfull to me. i am just adding estart to my 50hp blueband 4cyl (9362455)
Disconnect the extra black/yellow Wire going to the Harness (kill Wire) before testing. 11. all RED Stators WILL READ APPROXIMATELY 600-700 OHMS BETWEEN the WHITE/GREEN and the GREEN/WHITE Wires, (DVA 180V +) Mercury Outboard Red stators do not have a low/high speed winding. * Mercury Outboard replaces this Stator with the Red Stator Kit.. If not, there might be something wrong with the outboard stator. Low voltage is known to be another common sign of a bad stator, which is related to battery failure. Symptom 2: Trouble During the Engine Activation. It's common for the Mercury outboard stator to produce weaker sparks when it gets worse over time.