Schlage BE489WB CEN 622 Century Encode Smart Keypad Deadbolt Alarm

Disconnect, then reconnect the cable. Attach the inside assembly back on the door with the two screws. CLEAN the two battery connectors on the INSIDE of the assemble as well as the ones on the battery holder - use isopropyl alcohol. Even if they look clean DO THIS! Place the batteries in the holder and place it inside the assembly.. Schlage offers 11 hardware finishes so you can find the perfect look for your whole house. Here are the styles and knobs/levers that go best with each. WARRANTY: Limited lifetime mechanical and finish warranty and 3-year electronics warranty, see Schlage warranty for full details; BATTERY-OPERATED: Uses four AA batteries-included; up to six.

Pull out battery holder. Install batteries. Reinstall battery holder. Turn the battery holder around so the batteries face the door. Set up your lock. Final test! 1. Open your door! 2. Enter one of the two default user codes. 3. Your lock will enter a setup routine. When the bolt stops moving, setup is complete. 1. Close your door. 2.. A blinking red light on the Schlage BE489WB lock may indicate a failed Factory Default Reset (FDR). To fix this, perform an FDR by following these steps: 1. Remove the battery cover. 2. Press and hold the black circle reset button to the right of the thumbturn on the inside of the lock for 7 seconds, then release. 3.