REO REOVIB MFS 268 Industrial Electrical Operating instructions manual

This document provides operating instructions for REO-USA's MFS 268 frequency controllers for vibratory feeders. The controllers allow adjustable and independent feeder operating frequencies, integrated track control via a backlog sensor, and output for operating an air valve or controlling amplitude. Settings can be adjusted through menus accessed by entering codes and include parameters like.. REOVIB MFS 268 UL/CSA Operating Instructions 4 1.0 General The REOVIB MFS 268 range comprises special, adaptable controllers for use with vibratory feeders. The units generate an output frequency, to drive feeders, that is independent of mains frequency and so exact tuning with springs is not necessary.

REOVIB MFS 268 UL/CSA Operating Instructions ELEKTRONIK 14.0 Dimensions for 3 A, 6 A, 8 A Units Enclosed construction, (IP 54) Ø5,0 REOVIB MFS 268 SPEED www.reo.de Ø5,0 Panel mounting construction, (IP 20) Ø 5,0 Ø 5,0 REOVIB MFS268 REOVIB MFS268 Ø. Page 27: Dimensions Of Enclosed Construction (Ip 54) 12 A. REOVIB MFS 268 Operating Instructions EtherNet/IP - Programming 4 1.0 General The MFS 268 range of frequency converters for vibratory feeders can operate with an EtherNet-IP inter-face. In normal operation the set point, for the feeder throughput, can be sent from a PLC to the controller and the unit ready/fault status signals are fed back.