progress to the C parameter settings. To exit these settings at any stage, simply hold down the button where the meter will return to display 1. If no button operation occurs for 60 seconds whilst in a settings menu, the KT-LCD3 will discard changes and return to display 1.. ELECTRIC BICYCLE METER KT—LCD3 Product User Manual - 7 - Brake display ( ); Turn on backlighting and lights ( ); Environment temperature (℃ or ℉) display; Data clearing; Fault code display; User parameter setting 24V, 36V, 48V supply voltage can automatic identification and be compatible Display Content
shortly and go to the next parameter settings. 2. Wheel diameter setting Prepared by Suzhou Kunteng Electronics Co., Ltd. The wheel diameter will be set after finishing setting the maximum riding speed, wheel diameter specifications flashes. Hold or shortly to set the specifications of wheel diameter. Select the range. The C3 parameter setting will display on the meter after C2 settings. The KT-LCD3 will display as follows: C3 Display C3 parameters are settings for the power assist ratio gear upon start-up, where if the rider desires the bike to start up with a power assist ratio gear of 3, the C3 setting should be set to 3. The setting range for the C3.