Refer to the specific directions in the instruction manual for inserting the bobbin in your machine. Most machines will use or have a variation of the following steps to insert the bobbin in the top: Turn off the power. Raise the presser foot. Make sure the needle* is in its highest position by using the handwheel.. Remove the bobbin and re-insert it, making sure the thread is pulled through correctly. - Loose stitches: If you notice that your stitches are loose and easily pull out, your tension may be too loose, or you may have skipped a threading step. Refer back to step 5 of our installation guide to ensure all points were properly threaded and adjusted.
Here's how to put a threaded bobbin in your sewing machine. This process can be broken down into 3 main stages: Insert the bobbin into your sewing machine. Thread the upper thread system and needle. Pull the bobbin thread up. There are about 2 ways to insert the bobbin and 2 ways to pull the bobbin thread up (or not).. To insert the bobbin, turn your sewing machine off first. On a top-loading machine, remove the cover of the bobbin and just drop the bobbin into the case. Let the thread of the bobbin go through the slots. It should be in the exact path it's supposed to take.