Camera/Wall Mount 101; Setting up Nanit for optimal use;. Remove the Nanit camera from the box.. Carefully attach the Nanit camera to the stand by inserting the pins on the top of the stand into the back of the camera. When connected properly, the camera should snap onto the stand. 9. Place Nanit against the wall. Use a Philips screwdriver to loosen and remove the screws from the base (see How to avoid damaging the screwhead). Connect the replacement camera to the cables first if the extension cable is behind the wall. For example: Screw the bullet camera to the wall. Aim the camera properly by checking step 2 (bullet camera).
To see who is the owner of the camera, follow these steps: 1. Tap the side menu in the Nanit app. 2. If you have more than one Nanit camera - Tap the camera you'd like to remove from your account. 3. Choose your baby's settings. 4. If you're the owner of the camera, the word "Owner" will be displayed next to your name on the Parenting team list. Step 3: Remove The Camera From The Wall Mount. Now that your device is powered down and unplugged, it's time to remove the camera from the wall mount. Ensure you're standing at a safe distance as you detach the camera.. Now that your Nanit camera and wall mount are safely detached, take a moment to clean the area where the mount was.