Yes, you can use the same cleaning method for Therapure filter and Jura D6. When cleaning your jura d6, be sure to follow the manufacturer's instructions for best results. For the Therapure filter, regular cleaning with warm soapy water and a thorough rinse should suffice. Frequently Asked Questions Of How To Clean Therapure Filter. 1. Do not place near fans. 2. Keep both sides of the unit at least 1 foot (0.3 m) away from a wall. Page 7: Cleaning External Surfaces & MainTenance cleaning & MainTenance Cleaning External Surfaces Before replacing the Uv lamp, make sure the Therapure air purifier ® is turned off and unplugged. 1. Turn off and unplug unit. Replacing the Uv.
Permanent HEPA-type Filter takes particles 2. Air Inlet Grill out of the air, purifying it. 3. Permanent HEPA-type Filter: the permanent filter removes small visible 2. UV lamp reduces germs, such as and non-visible particles down to 0.1 microns in size. Page 5 ® 540 with a broken filter. Replace the filter if the filter has a tear or a hole.. 3. To clean the pre-filter, simply submerge in warm require more frequent cleaning. soapy water. Gently lift and submerge the NOTE: Always make sure the Therapure 640S is turned off and unplugged before cleaning. ® pre-filter several times until it is clean. Page 8: Replacing The Uv Lamp Cleaning the Air Monitor: Figure 1 off and unplugged.