Step 3: Place the Car Seat Base. Position the Graco car seat base on the vehicle seat, ensuring it's centered and even. Make sure the base is flat and not at an angle. Leveling the Car Seat Base. Check the level indicator on the car seat base to ensure it's level. If it's not, adjust the base accordingly. Step 4: Tighten the LATCH Connectors. Place the Graco car seat base in the back seat of your vehicle in rear-facing. Ensure the base is flat on the vehicle seat, then push it back until the front of the base touches the vehicle seat back. Graco car seat base installation. Open the SnugLock™ arm by pushing in the release lever. opening the SnugLock
Before we dive into the installation process, make sure you have all the necessary items at hand. These include: Graco Infant Car Seat Base; Car seat (compatible with the base) Vehicle owner's manual; Graco Infant Car Seat Base instruction manual; It is important to note that not all car seats are compatible with the Graco Infant Car Seat Base.. The lightweight Graco® SnugRide® 35 Lite LX Infant Car Seat supports baby in comfort from 4-35 lb and up to 32"".This video will review how to safetly instal.