Muncie Power's RS6S-P89M is a rear mounted PTO designed to fit Detroit DT12 transmissions in Freightliner or Western Star Class 8 Cascadia or 5700 trucks.. The Muncie Power Take-Off is warranted to be free of defects in material or workmanship and to meet Muncie's standard written specifications at the time of sale. Muncie's obligation.. wiring and transmission elements needed to support the PTO without the addition of the PTO hardware on the transmission. Check the information in PartsPro MOD 362, to confirm the vehicle being fitted with the PTO was ordered with the prep option. WARNING Mounting a PTO to a DT12 transmission is supported only for GHG17 vehicles. Adding a PTO.
DT12 1. This transmission contains NO LUBRICANTS. Use Mercedes approved transmission fluid (MB235.15 or MB235.11 Spec).. PTO BOLTS 37 FT/LBS PTO AIR SOLENOID BOLTS 21.2-31.8 IN/LBS PTO AIR CONNECTION FITTING 71-107 IN/LBS PTO COVER PLATE 18 FT/LBS PTO POSITION SWITCH 35 FT/LBS. • Select from menu: Transmission / 2 External Component Repair / 2.12 Power Take -Off / 2.12.2 Installation of the Power Take -Off Prior to installing the pump a bending moment calculation must be done to determine if the pump is with -in the weight limits of the flange . 5 most common sizes. DT12 PTO Prep Kit - Hydraulic Pump Application