The Craftsman 1/2 Hp Garage Door Opener typically includes a timer that controls how long the light stays on after the door is activated. If the timer is set too long or has malfunctioned, the light may remain on long after the door has completed its cycle.. The team here at Sevan Locks and Doors has a few tips to help you if your garage door opener light won't shut off when it's supposed to.
The Multi-Function door control is a panel on the inside wall of your garage that has a push button for operating the door, as well as a Lock and Light button. If the Light button has been pressed, just press and release the button again to turn off the light. See How to activate or deactivate the light feature or adjust the light timer on the Multi function door control. Note: Any garage door.. A clockwise turn will increase the time the light stays on, while a counter-clockwise turn will decrease the time. The range on most light units is from 90 to 240 seconds. Adjusting the Light Timer on a Newer Digital Unit Locate the garage door opener control panel, usually mounted on the inside wall of the garage.