amps have Saturation on by default (Brit Brown, Cameron Ch 2, PVH 6160). AMP VOICING - Voices the amp to a variety of tonal styles. Choose "Neutral" for the raw amp sound or one of the other voicings for a quick "mix-ready" tone. Affects POWER AMP LOW/HI CUT. HI FREQ - Sets the "corner frequency" of the speaker impedance rise due to. The Axe-Fx II offers 34 different basic block types that can be combined freely up to the limit of available DSP resources to create your own presets. An alphabetical listing of block types follows. 5.1 Amplifier [AMP] The Amp block reproduces the sounds of an impressive array of vintage and modern guitar and bass amplifiers,
![PLEX [V2] Amp Preset Pack for AXE FX III](https://static.wixstatic.com/media/f2c7b5_c618bcab153b4ec990ae52396a9a876c~mv2.png/v1/fill/w_996,h_996,al_c,usm_0.66_1.00_0.01/f2c7b5_c618bcab153b4ec990ae52396a9a876c~mv2.png "PLEX [V2] Amp Preset Pack for AXE FX III")
Some of the Factory presets on the Axe-Fx III and FM9 demonstrate the use of two Amp blocks. Axe-Fx II, Axe-Fx III, FM9 — 2 Amp blocks FM3 — 1 Amp block, where the Amp block shares a core DSP with the Delay blocks AX8 — 1 Amp block On the Axe-Fx, one DSP is always reserved for amp modeling. Therefore, adding a second Amp block (on.. Common combinations of amps and cabs are listed on the Amplifier models list page and in Yeks Guide to the Fractal Audio Amp models. Axe-Fx III and FM3 and FM9. The amp modelers have two Factory banks with 1,024 UltraRes IRs each, and a Legacy bank which contains all 189 stocks cabs from the Axe-Fx II. On the Axe-Fx III Mark II and Turbo, the.