HERE are the directions that I have for the head removal. Basically there is a plate on the back of the head that you remove. Then pull the camshaft out about 2 inches to clear the timing cover. I do hope that this answers your question. If you need anything else please feel free to ask.. 2005 Chrysler Pacifica head removal. BMSMITHGARAGE MEMBER; 2005 CHRYSLER PACIFICA; 3.5L; 6 CYL; AUTOMATIC; 175,000 MILES; I need to remove the heads. Can some one give me the steps to removing head and replacing timing belt? Saturday, April 5th, 2014 AT 7:17 AM. 1 Reply. KNOWLEDGE IS POWER.
(16) Remove the left cylinder head cover. (17) Remove the left rocker arm assembly. (18) Remove the left camshaft thrust plate. (19) Counterhold the left cam gear and remove the. cam gear retaining bolt (Fig. 19). (20) Push the camshaft out of the back of the cyl-inder head approximately 3.5 inches and remove the cam gear.. Customer: 2005 Chrysler Pacifica touring 3.5 v6 2wd. im replacing the head gasket for left cylinder head, the one in front of radiator. im having trouble getting the camshaft back in place while cylinder head is in place on engine. im not sure if I need to reassemble cylinder head with camshaft and rocker arm assembly off the vehicle or assemble it while the cylinder head is already in the.