How To Install The Lutron Digital Dimmer Kit As A 3Way Switch Lutron

In the diagram, the power supply enters from the left. As you can see, the 2-way switch is solely being used to control the black wire. It doesn't matter if you use a brass or silver screw; you have a black hot wire coming in that goes to one screw on the side of the 2-way switch, and a black wire coming from the other screw on the 2-way switch that goes to the load (light, ceiling fan e.t.c).. Wire strippers and cutters: These tools are essential for cutting and stripping the wires, allowing for proper connections. Screwdriver: A screwdriver will be used to secure the dimmer switch to the mounting bracket. Voltage tester: This tool will help you determine if the power is off before you start working on the switch. Dimmer switch: Make.

Now connect the dimmer switch for this purpose connect wires on a dimmer switch with wires coming from the electrical box. The black wire of dimmer switches with one black line wire. Other black switch wires with one black load wire. Green dimmer switch wire with two bare copper box wires. Make a connection of 2 white box wires with a wire nut.. Here is a great way to control your LED lighting. A convenient floor mounted old school dimmer switch controls lighting perfectly and is very inexpensive.Wan.